News Information

-
-
-
Thin latex gloves

Thin latex gloves

(Summary description)They say that wisdom lies in the people. A little sister said after listening to the nurse sister’s paper: “In order to make it easier to answer the phone, we usually wear disposable film gloves (polyethylene gloves) before wearing latex gloves in the laboratory.

Thin latex gloves

(Summary description)They say that wisdom lies in the people. A little sister said after listening to the nurse sister’s paper: “In order to make it easier to answer the phone, we usually wear disposable film gloves (polyethylene gloves) before wearing latex gloves in the laboratory.

Information

They say that wisdom lies in the people. A little sister said after listening to the nurse sister’s paper: “In order to make it easier to answer the phone, we usually wear disposable film gloves (polyethylene gloves) before wearing latex gloves in the laboratory. In fact, this can prevent latex allergies. Right?" Latex gloves are made of 100% natural latex with high dexterity, very comfortable to wear, and high strength. The pinhole rate is low, and it has excellent sealing protection characteristics. It is widely used in related industries such as electronics, food, medicine and optoelectronics. Thin latex gloves have a strong anti-slip force, so the broom against the wall can also play a non-slip effect. You can do more with one stone. 3. After the beer is opened, it is easy to deteriorate if it is not properly sealed. At this time, you can put a layer of plastic wrap, and then cut your fingers on the sleeve, no matter how you pour it, it will not spill out, and the airtightness is very good. Thin latex gloves

How do consumers judge the quality of latex gloves? In fact, a good pair of latex gloves does not only depend on whether the surface is clean and beautiful, yellow, with good curling, high tension and no air leakage. However, whether the tensile force of latex gloves is large or not, we still need to test it. This requires the use of professional machines for testing. We can also judge the quality of the gloves by the color of the gloves. White or over-white latex gloves contain a lot of additives. The whiter the color, the more additives, and the more additives, the lower the pulling force. However, now there are many gloves with a yellow pigment, so that the color of the gloves can be changed, so this method is not completely reliable. ***We also have to look at the degree of wrinkles in the gloves. The same is a pair of latex gloves. Open from the package, gloves with high glue content will never wrinkle much. If a pair of gloves is wrinkled and white, it can be seen that the glue content is extremely low. The reason why we all use latex is because latex is highly scalable and elastic, and other alternatives are not as good as latex. We can also judge by measuring methods, mainly measuring the length of the glove, mainly the distance from the tip of the middle finger to the outer edge of the wrist. There is also the width of the glove, which is quite wide in the horizontal position of the thumb and the base of the four fingers. What is to be measured is the thickness of the glove. The middle finger and palm (double layer) are measured separately. For the arbitration test, the glove can be cut to measure the thickness of the single layer. . We can also use it to seal red wine, white wine and similar bottled liquids. 4. Cut the fingers of the rubber glove into small pieces. Then you can use it to tie your hair, which is much stronger than the rubber band you buy. It also looks beautiful and very durable. Thin latex gloves 5. Try to shorten the time each time you wear gloves; 6. Avoid eating chestnuts, kiwis, bananas, avocados and other foods that cross-react with latex. 7. If occupational exposure is unavoidable, try to avoid unnecessary latex exposure in life to reduce the frequency of exposure. Thin latex gloves

1. Protective latex gloves. Natural rubber gloves should not be in contact with acids, alkalis, and oils for a long time when used, and should be prevented from puncturing by sharp objects. After use, wash and dry, and sprinkle talcum powder on the inside and outside of the gloves, and keep them in a safe place without pressure or heat during storage. 2. Protective latex gloves. The color of all rubber, latex, and synthetic rubber gloves must be uniform. Except for the palm, the other parts of the gloves must be similar in thickness, and the surface must be smooth (for non-slip, striped or granular on the palm and face) Except for anti-slip patterns) or no bubbles larger than 1.5mm are allowed on the palm and face, slight wrinkles are allowed but no cracks are allowed. . Daily necessities containing latex include keyboard membranes, cleaning gloves, non-slip mats, condoms, balloons, glue/tape, pacifiers, rubber shoes, rubber toys, etc. 8. For doctors and nurses suffering from rapid latex allergies (type ⅰ allergic reactions), colleagues around also recommend the use of powder-free and low-protein gloves to avoid inhalation contact.

The thin latex glove model is first cleaned with acid and alkali and washed with water. The washed model is first immersed in hot water and heated until it is soaked in coagulant and dried for dipping. After dipping, it is sent to the oven to start drying, the fiber is lined, and the hot water is sent to the oven for vulcanization, drying and forming. After the gloves are demolded, they are inflated and checked, low-temperature setting, medium-temperature drying, water washing, dehydration, drying, and then packaged and sent to the finished product warehouse. Natural rubber latex products themselves are more sticky. The difference between nitrile gloves and latex gloves: (1) Material: latex gloves are also called For rubber gloves, latex is a natural material, derived from rubber tree sap. Natural latex is a biosynthetic product. Due to differences in tree species, geology, climate, and other related conditions, its composition and colloidal structure often have huge differences. In the fresh latex without any substance, the rubber hydrocarbon only accounts for 20%-40% of the total amount, and the rest is a small amount of non-rubber components and water. Non-rubber components include protein, lipids, sugars and inorganic components. Some of them form a composite structure with rubber particles, and some are dissolved in whey or form non-rubber particles. Nitrile gloves are popularly called nitrile gloves. Method, nitrile is a kind of rubber, a key raw material for organic synthesis and pharmaceutical intermediates. Mainly synthesized from acrylonitrile and butadiene. Nitrile: A type of organic compound with a special odor, which decomposes when exposed to acid or alkali. , Products such as latex gloves will stick to each other if they are not treated on the outside. Not only is the separation between gloves and gloves not easy, but also the time to use is not easy to wear thin latex gloves. In order to deal with this problem, it is now common practice to dip powder such as corn starch on the inside and outside of the glove to increase slippage and prevent sticking. However, the powder on the powdered gloves is very uncomfortable when it gets on the hands, and it can cause skin allergies in many people, and its application in special fields such as the electronics industry is also restricted.

Scan the QR code to read on your phone

Feedback

Username used for comment:
客户留言
Description:

Related reading

Universal Medical
Universal Medical

Mobile browsing

Contact

CHINA

E-mail (Jerry Gao) : jerrygao@yshonmed.com

E-mail (Candy Du) : candydu@yshonmed.com

HONG KONG

E-mail (Shawn Shao) : shawnshao@yshonmed.com

EUROPE

E-mail (Julien Jin) : julienjin@yshonmed.com

Nanjing Universal Medical Equipment Co., Ltd.  Powered by: www.300.cn Changzhou  苏ICP备2021012801号  IPv6 is supported